Process compatibility
Assessed against the ore, water chemistry and intended flowsheet.
Ore-specific gold beneficiation
Responsible gold processing starts with a controlled test.
Every ore behaves differently. We assess JINSHEN for the intended heap-leach or CIP/CIL route, and move to operational use only after ore-specific testwork defines the operating basis.
For licensed mineral-processing operations only.
25 kg
Commercial pack
Controlled test
Heap leach
CIP / CIL
Technical support
The product system
Built around the realities of the plant.
JINSHEN is evaluated as part of a complete operating system: ore, water, equipment, controls and people. The result is a practical introduction plan—not a one-size-fits-all promise.
Stable performance
A defined operating window, verified through testwork and monitored during introduction.
Easier handling
Clear site procedures for storage, preparation and dosing.
Logistics friendly
Supply and delivery planning aligned with project volume, location and schedule.
Technical support
Guidance from test planning through controlled start-up and review.
Responsible use
For licensed operators working under site controls and applicable requirements.
Application routes
Two routes. One test-led approach.
Select a route to see where the operating questions change. In both cases, representative testwork comes first.
For engineered leach pads
Heap leaching
For crushed or run-of-mine ore placed on engineered leach pads. Testwork defines the proposed reagent concentration, irrigation strategy, contact time and solution management before any site-scale introduction.
- 01Crush
- 02Agglomerate
- 03Leach
- 04Pregnant solution
- 05Carbon
- 06Doré
For agitated-tank circuits
CIP / CIL
For agitated-tank circuits using activated carbon to adsorb dissolved gold. Ore-specific tests define dosage, contact time, carbon interaction and solution controls before plant use.
- 01Grind
- 02Thicken
- 03Leach / adsorb
- 04Desorb
- 05Recycle
- 06Doré
Test before scale-up.
Verify on site.
Technical support
From ore sample to stable operation.
Each gate produces the evidence needed for the next. Scale-up follows results, not assumptions.
-
01
Ore review
Review available mineralogy, assays, particle-size, water-chemistry and flowsheet data.
-
02
Laboratory test
Define the protocol, operating variables, measurements and decision criteria using representative samples.
-
03
Pilot plan
Translate laboratory findings into a site-specific pilot protocol.
-
04
Start-up
Introduce the reagent under agreed controls, qualified supervision and site safety procedures.
-
05
Optimize
Review operating data, then adjust the operating window where supported by evidence.
Controlled supply
Clear documentation. Traceable delivery.
Project support connects the physical product with the handling guidance, test basis and delivery records needed at site.
- Raw-material control
Incoming material checks and batch management.
- Batch inspection
Inspection and retained samples for supply records.
- Traceable delivery
Packaging, labels and delivery coordination.
- Technical documents
Project-specific documents supplied as applicable.
Proof before scale-up.
For professional use only in licensed mineral-processing operations. Use under qualified technical supervision and in accordance with applicable laws, permits, site procedures and the current Safety Data Sheet. Test results are specific to the ore and test scale. No specific recovery rate or process-performance outcome is guaranteed.
Technical project review
Tell us about your ore and process.
Share the available information so we can prepare a focused technical discussion.
Project intake checklist
- Project or mine location
- Ore type, grade, mineralogy and available assays
- Current or planned route: heap leach, CIP or CIL
- Representative sample availability and quantity
- Water chemistry, target schedule and site constraints
- Permit status and technical contact